Guide · 6 min read

EPABX vs IP-PBX: Which Phone System Suits Your Office?

Choosing a business phone system is mostly about how your organisation takes calls today and how it will grow: more users, more branches, more people working away from their desks. This guide compares traditional EPABX systems with IP-PBX systems and explains where each fits.

By XTSURE ·

How each system works

A traditional EPABX connects analogue or digital handsets over telephone cabling and connects to the outside world through analogue or digital lines from a telecom operator. An IP-PBX runs over the data network: IP phones connect to network switches, calls travel as data, and outside lines are usually SIP trunks delivered over an internet or dedicated connection.

Side by side

EPABXIP-PBX
ExtensionsAnalogue or digital handsets on telephone cablingIP phones and softphones on the data network
Outside linesAnalogue or digital linesSIP trunks, often alongside existing lines
Branches and remote staffSeparate systems or extra hardware per siteExtensions over the WAN or internet, one numbering plan
Moves and changesOften needs re-patchingUsually a configuration change
Network dependenceIndependent of the data networkDepends on switching, PoE and QoS
FeaturesCore call handlingCore call handling plus integration with other applications where supported

When an EPABX still makes sense

  • A single site with existing telephone cabling and handsets in good condition.
  • Users who mainly need reliable desk phones and simple call handling.
  • A network that is not yet ready to carry voice traffic.

When an IP-PBX is the better fit

  • Several offices that should share one extension plan.
  • Staff who move desks, work hybrid or need extensions on laptops and phones.
  • Reception, IVR, queues and hunt groups across departments or sites.
  • A new office being cabled for data, where separate telephone cabling can be avoided.

Hybrid systems

Many offices do not need to choose all at once. Hybrid systems keep existing analogue extensions and lines working while new users and branches move to IP phones, so the change happens in stages and existing investment is not wasted.

Getting the network ready for voice

  • PoE switches with enough power budget for every IP phone.
  • A voice VLAN to separate phone traffic.
  • QoS so calls are prioritised when the network is busy.
  • Internet or WAN capacity sized for the number of simultaneous calls.
  • Firewall settings that allow voice traffic without exposing the system.

Questions to answer before choosing

  1. How many users, extensions and outside lines do you need now and in three years?
  2. How many sites, and do they need to dial each other by extension?
  3. Who answers incoming calls, and how should calls reach departments after hours?
  4. Can existing cabling, handsets and lines be reused?
  5. Is the network ready for voice, or does it need preparation first?

Common questions

Can we keep our existing phone numbers when moving to an IP-PBX?

In many cases, yes. Existing lines can often be connected to the new system, or numbers moved to new trunks where the operator supports it. We confirm the options with your telecom provider before migration.

Do IP phones need separate cabling?

No. IP phones use network cabling and are usually powered by PoE switches. Many models also have a port for the desk computer, so one cable can serve both.

Planning a new office, an upgrade, or better support for what you already run?

Tell us what you are working on. We will ask the right questions, look at what exists today, and come back with a clear recommendation.